Skip to Content

Thrift Flip: Upcycled Side Table Idea!

Do you love thrifting? You are going to love this plant stand project! It’s a fun project and a great upcycled side table idea!

I had a lot of fun at my Goodwill one Sunday without the toddler (oooh sweet freedom!) and I was shocked at my great scores.

thrift haul

I am going to be overhauling all of these pieces, but for this project, I will be focusing on the butcher block cutting board and the mid century inspired chair you can see in the cart.

thrifted table and cuttingboard before

I love finding big, heavy wooden cutting boards at the thrift store.

This one was $7.99, which Sean says was a rip off. But, I thought it was a good deal for what it was.

If you find a cutting board at the thrift shop and want to restore it to use as an actual cutting board, make sure you read our guide on how to restore an old cutting board!

butcherblock cutting board from the thrift store before

The chair, however, was another story. This is a really popular style of chair. However, this one appeared to have a green seat that was spray painted (poorly) white and then scratched and heavily damaged.

The paint was peeling and lumpy. There was mysterious velcro on it. It was shoved into the back behind some dressers.

modern chair from the thrift store before

But there was no price tag on it! If you shop at Goodwill – you know that means one of two things – someone is walking around the store with the price tag (claiming the item), or it is not priced and it will have to be taken back to be priced.

I spoke to an employee and she very kindly made an announcement if anyone had the tag to come buy it now or it was being re-sold.

She also kind of scrunched her nose at the chair and said “this thing has been here a loooong time.” 😀

No one claimed it, so she took it back and, much to my delight, priced it for me immediately. Would $3.99 work? Yes, it would!

Love this project? Check out when I turned a vase and a chip and dip plate into a side table!

thrift flip side table from a chair and cutting board before after

How to upcycle a Chair into a Side Table

Want to turn an old damaged chair into a table? This project was super easy to do!

Supplies needed:

  • Old chair with a base you like
  • Large wooden cutting board – as sturdy as possible
  • Drill, wrench, or saw – depending on how your chair legs are attached to the chair
  • Sander + sand paper
  • Optional/if needed: wood filler
  • Walrus Oil or wood finish of choice
  • Screws

Steps to make a side table from a cutting board + chair:

STEP 1: Prep the cutting board

First, I needed to clean up the cutting board. I sanded it thoroughly with 60 and then 120 grit sand paper and my electric sander.

This was just to clean up the scratches and dings.

A few of the boards in the cutting board were separating so I used color match wood filler to carefully fill the cracks.

Once dry, I then sanded again to remove excess wood filler.

Then, I coated the whole board generously with Walrus Oil, my favorite cutting board oil. That really gave the wood a rich look.

STEP 2: Prepare the legs

The next step was to prepare the legs. I used a hex wrench to unscrew them from the chair base.

Then, I placed my board on top and realized that the base was not level.

The brackets in the back were rotated 90 degrees compared to the front brackets. Luckily, these were easy to unscrew and rotate.

If your legs are not screwed into the bottom of the chair, you might need a saw (I’d suggest a reciprocating saw) to separate them. Then, you will likely want to sand the cut edge smooth.

turning a cutting board into a side table

STEP 3: Attach the legs to the cutting board

After that, I simply screwed the legs onto the bottom of the butcher block.

I measured to make sure it was centered and then screwed it in with my drill – a screw + a washer since the base brackets had large holes.

I am OBSESSED with how this turned out and the mid century modern vibes.

side table made from a cutting board and chair legs

Not bad for $12 and about 30 minutes worth of work!

This little table could work as a side table or as a plant stand. If you know me, you know that I could never have enough DIY plant stands!

side table made from a cutting board and chair legs

Looking for something?

We’ve been doing this since 2012 so we have a LOT of blog posts!
Search stuff like: Ceiling Projects | DIY Plant Stands | Thrift Flips

Charleston Crafted logo banner

Lots of Easy Ways to Upcycle Thrift Store Decor Finds - Garden

Saturday 31st of October 2020

[…] Upcycled to make a modern side table […]

10 DIY Upcycle Home Projects - Farm Girl Reformed

Monday 30th of March 2020

[…] DIY Side Table […]

15+ easy DIY projects to tackle while staying at home

Friday 27th of March 2020

[…] have to click over and see what this side table started as when she found it at the thrift store!  Absolutely amazing!  Could also be used as a plant […]

10 Upcycle Projects Anyone Can Do

Friday 28th of February 2020

[…] Would you believe this started out as a thrifted find? Take a look at this Upcycled DIY Side Table From a Thrifted Chair designed by Charleston Crafted. […]

Marty Walden

Wednesday 19th of February 2020

So adorable! I love Goodwill but sometimes they can be pricy!

Sean

Wednesday 19th of February 2020

Yeah, you have to hunt sometimes!

Comments are closed.