Skip to Content

How to cut door hinge notches

Earlier this week, you read about the new pantry door we put up in our kitchen. It was a world of problems, but one of the easiest parts of the project was one of the ones I thought would be the hardest, which is how to cut door hinge notches.

The door didn’t have the hinge notches needed for the door hinge to fit flush with the outside of the door, so the door didn’t close properly. I had to cut out the door hinge notches myself, but it was super easy. Here’s how to cut door hinge notches.

How to Cut Door Hinge Notches - Charleston Crafted

First, attach the door hinges to the door in the appropriate places and then trace the outside of the hinge on the door. Then, remove the hinges.

Second, score the door within the traced area. You can do this a number of ways, but I chose to use an Xacto knife to score the traced edge of the hinge and then randomly within the trace.

This will help make it easier for your chisel to work. You can also use your chisel to tap in straight notches within your traced area.

How to cut door hinge notches

Next, use a chisel to… um, chisel out the wood in the hinge area. I used a 5/8 inch wide chisel because I knew it was a small area. Keep the chisel as flat and level with the door as possible to avoid digging too deep into the door and taking out too much wood. For the first few layers and the bigger areas within your hinge trace, use a hammer to tap the butt of the chisel to get it going. Continuously work and chisel out the area as best you can.

How to cut door hinge notches

How to cut door hinge notches

After you think you’re done, you probably aren’t. Grab the hinge itself and put it into your chiseled out area to test it. Likely, you will need to chisel out more around the curved edges like I did. Fine tune your chiseled area until the hinge lies flat and flush with the door in the area you traced out.

How to cut door hinge notches - Charleston Crafted

Do that for your next two hinge notches and then screw in the hinges. Now your door should be ready to hang.

How to cut door hinge notches - Charleston Crafted

If all that didn’t get you, here’s a little video to hopefully answer any last questions.

This was a super easy project and took me about 20 minutes to do all three hinge notches. This was the final step in our pantry door and the final step of our kitchen renovation.

If you’re looking for how to cut door hinge notches, look no further because YOU CAN DO IT. It’s not hard and you’ll love your new door!

How to cut door hinge notches
Yield: 1 door

How to cut door hinge notches

Active Time: 30 minutes
Total Time: 30 minutes
Difficulty: Medium
Estimated Cost: $0-10

If you want to add hinges to a door, here is the easiest way to add door hinge notches yourself.

Materials

  • Door hinges
  • New door

Tools

  • Pencil
  • Exacto knife
  • Chisel
  • Hammer

Instructions

  1. Trace your hinges in the spot that you want them onto your door.
  2. Trace that line with an exacto knife and then score within that area (to be cut out) with the knife.
  3. Use your chisel and hammer to chisel out the scored area.
  4. Place the hinge in the cut out spot to check fit.
  5. Chisel more until the hinge fits.
  6. Repeat for all hinges on the door.

Recommended Products

As an Amazon Associate and member of other affiliate programs, I earn from qualifying purchases.

Did you make this project?

Please leave a comment on the blog or share a photo on Pinterest

Looking for something?

We’ve been doing this since 2012 so we have a LOT of blog posts!
Search stuff like: Ceiling Projects | DIY Plant Stands | Thrift Flips

Charleston Crafted logo banner
Skip to Instructions